Order Static Control Elimination Equipment Now. 1-800-978-4299 Static Control Pulsed DC Static Equipment

Pulsed DC Static Equipment

Pulsed DC Controller

Model 1520 Pulsed DC Controller

The Model 1520 Pulsed DC System allows you long range industrial ionization without the need of a air-blowing unit. It also allows you to control the polarity where you know the static charge of the product where static elimination is necessary. The 1520 Pulsed DC System also allows speed control of the ions in the targeted static prone area. Download technical bulletin.

 

Applications include: Screen Printing for Ink Spidering, Blow Molding for Parison Swings, Benchtops, Prepress Areas, Pad Printing, Powder Packaging, Full Room Ionization, Long Range Static Control without Air, Packaging, Printing, Electronics and Assembly.


Pulsed DC Bars

Model 1525/1625 Pulsed DC Bars

The Model 1525 and 1526 Pulsed DC bars range in sizes from 3 inches to 144 inches. They can be used in full aread static control and long range ionization where air cannot be used or one polarity, positive or negative, is necessary to remove high static charges.

 

The Model 1526 is available with air to discharge areas where distance ionization is necessary. These units can be chained together for ionization over a larger area with the use of only one power supply. Download technical bulletin.


AC Static Eliminator Bar

AC Static Elimination Equipment

AC Static Eliminator Bar
This static eliminator bar is the industry's most popular medium range ionization static elimination bar. This high performance, rugged, low cost, shockless unity is available in four styles: single-scan (single row of emitters), wide-scan (two rows of emitters - like having two bars in one), dual-scan (two rows of emitters set 180° apart) and air-bar (combining two rows of emitters with compressed air emitting tubes). The units perform effectively within 3" of static charged surfaces and on materials traveling up to 2000 feet/per minute. The air-bar unit provides an ionization range of 8 inches, enveloping the target surface in a wide field of negative and positive ions.


Ion Edge AC Static Eliminator Bar

Ion Edge AC Static Eliminator Bars

Our Ion Gun uses compressed air and neutralizes electrostatic chartes to eliminate attraction, visual imprefections and contamination issues by dislodging charged dust and debris. The unit discharges faster than 1 second with a ± 30 volt offset voltage balance. Our Ion Gun has a modular design with a 7 foot ESD protective hose with a trigger switch allowing operators to have freedom of motion and minimize akward or unsupported positions.


AC Air Gun Info

  • • Shockless Ionized Air Gun
  • • Eliminates positive and negative static
  • • Removes dust and contaminates
  • • Stainless Steel Ionization head
  • • Durable, Shockless, Safe
  • • 115 volts, 50/60 Hz.

Spot Ionizer Spec Info

  • • Localized Static Elimination
  • • Constant Ion Pulse Rate
  • • Ion Balance Control
  • • Effective Range: 12"
  • • Made in America
  • • Non-Air Ionization

Ion Gun Spec Info

  • • Filtered air or nitrogen (no adjustment)
  • • Made in America
  • • 120 Volt Ion Gun
  • • Point-of-use compressed air
  • • 7 foot ESD protective hose




More Static Control and Elimination Products




Pinpoint Ionization

Static Control Spot & Pinpoint Ionizers

Need localized static elimination? Is air flow ionization impossible? Our Model 1550 Spot Ionizer provides a constant ion pulse rate and ion balance control allowing for effective static control in specific manufacturing areas. It is practical to use in areas where ionizing static bars or ionizing blower units cannot fit.

View Ionizing Static Bar Inventory

Ionizing Air Blowers

Static Control Ionizing Air Blowers

Our Ionizing Air Blowers remove static from the three dimensional parts and can be used at either a close or far distance. Control static on plastic parts, packaging components, unwinds, printing, converting, electronics, textiles or other applications where static control is necessary.

View Ionizing Air Blower Inventory

Ionizing Static Bars

Static Control Ionizing Static Bars

Our leading industrial ionizing static bars are ideal for web and sheet application. Our products can produce equeal amounts of positive and negative ions with up to four inch distance of static control. Our ionizing static bars can be manufactured at sizes ranging from 2 inches to 144 inches and are applied in areas where a rugged static eliminator is necessary.

View Ionizing Static Bar Inventory

Pulsed DC Static Equipment

Static Control, Pulsed DC Supplies

When long range airless industrial ionization is required, you most likely will need pulsed DC static control equipment. Our equpment also allows for ion speed control to target static prone areas.

View our Pulsed DC Static Equipment

Static Meter

Static Control, Static Measuring Meters

PLX's Static meter is a non-contact device that indicates electrostatic field voltage and polarity on charged surfaces. It also comes equiped with a Power On/Hold button and a zero button and shuts off after 90 seconds.

View our Static Meters/Measuring Equipment

Ionizing Air Guns/Nozzles

Static Control, Ionizing Air Guns

Our Hand Ionizing Blow Off System is practical for areas where contamination can  create manufacturing or handling problems. Our hand gun ionizers and air nozzles are a great tools to combat ElectroStatic Attraction [ESA].
View our Ionizing Air Guns/Nozzles Inventory


Cleanroom Supplies

Static Control Cleanroom Supplies

Have a dust problem? PLX can help with a full line of Cleanroom Supplies. We have a variety of sizes and different materials of Shoe Covers, Latex, Vinyl and Nitrile Protective Gloves, Face Masks/Beard Covers and Coveralls. PLX can help with your dust and static control.

View Cleanroom Supplies Inventory

Tack Floor Mats

Static Control, Adhesive Mats

Need a unique, cost-effective solution to capturing static-prone dirt and particles before they contaminate your workplace? Our PLX Mats are the ideal first line of defense against unwanted dirt and contamination from shoes and equipment wheels. Our sticky mats are easier to use than synthetic, vinyl or capet masts.

View Tack Floor Mats Inventory

Steady State/Pulsed DC

Static Control, Steady State Pulsed DC Equipment

Controlling static on plastic parts, printing, converting, electronics, textiles, packaging components, unwinds or other applications where static control is necessary is important. Our Steady State/pulsed DC Equipment removes static from the three dimensional parts and can be used at either a close or far distance.

View Steady State/Pulsed DC Inventory

Grounding Straps/Tinsel

Static Control, Grounding Supplies, Tinsel

We have many different types of equipment for different applications. PLX's full line of grounding devices include watches, wrist straps, heel grounding, anti static spray, cleaning mats and rollers and tinsel.

View Grounding Straps and Tinsel Inventory

FREE CATALOG

Static Control Free Digital Catalog

Fill out the information below to receive a Free Static Control Products Catalog.

Email:

Name:

Phone:

Comments:


Static control equipment is primarily used in industries that process plastic, paper, electronics, nonwovens, medical products, automotive, textiles, converting, printing, packaging and non-metals manufacturing where stubborn dust and dirt can be problematic. PLX Industries Static Control can solve your static and dust problems right now.


We can also help you with Cleanroom Sticky Mats.